Tuna Tube 6.25×4.25×15″ (external) lid mountable – bare tube

Description

This 3d printed tuna tube had been tested off the southern shores of South Carolina. The external size of 6.25×4.25×15″ can support one large or 2 medium bonita. Desiged to be through mounted in a live well replaement lid, this tube has an intgrated mounting flange 1/2″ wide and 3/16″ thick. Reinforced bolt holes 1/8′ in diameter can be overdrilled to 3/8″.

Detailed specifications:

• 6.25×4.25×15″ external
• 6×4″ internal oval
• 8″ of full 6×4″ cross section
• 5″ conical expansion
• 2″ input
• 3/4″ NTP theaded input
• No pump or wiring provided.

Please ensure you have adequate clearance for the tube and installed pump. Measure from the mounting surface to the bottom of the livewell. You will need the tuna tube length + 3.5″ to accommodate a standard 800gph livewell pump. ThatGuy recommends and additional 1/4″ to ensure nothing ever touches the bottom of the livewell.